OVERVIEW
MANUALLY SET CLOCK
1. Press and hold MODE.
FRONT VIEW (FIG. 1)
2. Press or to change the settings. (Press and hold
to change the setting quickly.)
1. SNOOZE: Snooze alarm
3. Press MODE to confirm.
4. The settings order is: time zone offset, hour, minute,
year, month, day and language.
2. Weather forecast and pressure trend
3. Outdoor temperature readings and trends, and Hi /
Lo temperature alarms
0FHF4
Weather Finder
4. Atomic clock / alarm and date
NOTE Select the time zone: (PA) Pacific, (EA) Eastern,
(CE) Central or (MO) Mountain.
5. Indoor temperature readings and trends
6. MODE: Change settings or display
7. ALARM: View alarm status; set alarm
8. MEM: View current, maximum and minimum
temperature
USER MANUAL
NOTE The language options are English (E), German
(D), French (F), Italian (I), and Spanish (S).
(FIG. 1)
To select display mode:
Press MODE to choose between clock with seconds
and clock with weekday.
BACK VIEW (FIG. 2)
�
1. Wall mount hole
2. RESET: Reset unit to default settings
3. CH: Switch remote sensor display
4. TEMP HI / LO : Change settings or enable / disable
Hi or Lo temperature alarm
ALARM
To set the alarm:
1. Press ALARM to view display.
alarm time is displayed.
shows when the
5. °C / °F: Select temperature unit
�
6.
/
: Increase / decrease setting; activate /
2. Press and hold ALARM.
deactivate clock reception signal
3. Press
/
to set hour / minute. (Press and hold to
7. Battery compartment
8. Table stand
change the setting quickly.)
�
�
�
4. Press ALARM to confirm.
indicates alarm is ON.
REMOTE SENSOR (FIG. 3)
To toggle alarms ON / OFF:
1. Press ALARM to display alarm time.
1. LED status indicator
2. Wall mount hole
3. Battery compartment
4. RESET hole
2. Press ALARM again to turn alarm ON / OFF.
�
To silence the alarm:
•
Press SNOOZE to silence it for 8 minutes.
5. CHANNEL switch
OR
Press any other key to turn the alarm off and activate
it again after 24 hours.
•
�
GETTING STARTED
INSERT BATTERIES
�
WEATHER FORECAST
1. Remove the battery door.
2. Insert the batteries, matching the polarities (see FIG. 2).
3. Press RESET after each battery change.
This product forecasts the next 12 to 24 hours of
weather within a 30-50 km (19-31 mile) radius with a
75% accuracy.
NOTE
displays when batteries are low.
LOCATION
MEANING
(FIG. 2)
Indoor temperature area
Outdoor temperature area
Main unit batteries low
Sensor batteries low
Sunny Partially Cloudy
Cloudy
Rainy
TEMPERATURE
REMOTE SENSOR
�
To toggle temperature unit:
Slide °C / °F to the desired setting.
The main unit can collect data from up to 3 sensors.
�
�
To view outdoor sensors readings:
Press CH.
To set up the sensor:
1. Slide open the battery door.
2. Insert the batteries, matching the polarities.
3. Select a channel, then press RESET (Reset after a
channel or battery change.)
�
�
To auto-scan between sensors:
Press and hold CH to display each sensor’s data for
3 seconds.
4. Close the battery door.
5. Place the sensor within 30 m (98 ft) of the main unit
using the table stand or wall mount (see FIG. 4).
To end press CH or MEM.
�
To toggle between current, minimum and maximum
records for the selected outdoor sensor and indoor
(main unit) sensor:
NOTE Use alkaline batteries for longer usage and
consumer grade lithium batteries in temperatures
below freezing.
Press MEM repeatedly.
�
To clear the records:
Press and hold MEM.
WEATHER TRENDS
The pressure trend icons are based on recent sensor
readings.
SENSOR DATA TRANSMISSION
�
To search for a sensor:
Simultaneously, press and hold MEM and CH for 2
seconds.
RISE
STEADY
FALL
(FIG. 3)
The sensor reception icon in the remote sensor area
shows the status:
�
ICON
DESCRIPTION
Main unit is searching for sensor(s)
A channel has been found
Sensor 1 data received
HI / LO TEMP ALARMS
�
Temperature alerts can be set to sound if sensor set
to Channel 1 records above or below a temperature
of your choice.
�
and “--.-“
The sensor cannot be found
�
�
To set alarm ON / OFF:
1. Press and hold TEMP HI / LO
.
TIP The transmission range may vary depending on
many factors. You may need to experiment with various
locations to get the best results.
2. Use
or
to change settings.
3. Press TEMP HI / LO to confirm.
4. The setting order is: alarm type, alarm ON / OFF, alarm
temperature value.
LO
/
HI will appear above the
CLOCK
temperature to indicate the alarm is on.
(FIG. 4)
CLOCK RECEPTION
To silence the Hi / Lo alarm:
Press any key. The alarm resets automatically and will
resound if the hi / lo temperature selected is recorded
again.
This product is designed to synchronize its clock auto-
matically with a clock signal.
WWVB-60 signal: within 3200 km (2000 miles) of Fort
Collins, Colorado. Manually set clock to select time
zone (Pacific, Mountain, Central or Eastern).
•
RESET
Press RESET to return to the default settings.
To enable / disable signal reception:
Press and hold
reception.
to enable or
to disable signal
PRECAUTIONS
•
•
•
•
•
Do not subject the unit to excessive force, shock, dust,
temperature or humidity
NOTE Reception takes 2-10 minutes. If the signal is
weak, it can take up to 24 hours to get a valid signal.
Do not cover the ventilation holes with any items such
s newspapers, curtains etc.
Clock signal reception indicator:
Do not immerse the unit in water. If you spill liquid
over it, dry it immediately with a soft, lint-free cloth.
Do not clean the unit with abrasive or corrosive
materials.
Do not tamper with the unit’s internal components.
This invalidates the warranty.
STRONG SIGNAL WEAK SIGNAL NO SIGNAL
BAR186A_IM_LLB_EN_NO R_R0
1
20.11.2007, 10:23 AM
|