Marley Engineered Products Electric Heater RK Series User Manual

RK Series  
Infrared Heaters  
FILE #E21609  
Installation & Maintenance Instructions  
Dear Owner,  
Congratulations! Thank you for purchasing this new heater manufactured by a division of Marley  
Engineered Products. You have made a wise investment selecting the highest quality product in the heat-  
ing industry. Please carefully read the installation and maintenance instructions shown in this manual.  
You should enjoy years of efficient heating comfort with this product from Marley Engineered Products...  
the industrys leader in design, manufacturing, quality and service.  
... The Employees of  
Marley Engineered Products  
WARNING  
!
Read Carefully - This instruction sheet contains vital  
information for the proper installation, use and efficient  
operation of the heater. Carefully read the manual before  
installation, operation, or cleaning of the heater. Failure to  
adhere to the instructions could result in fire, electric  
shock, death, serious personal injury, or property dam-  
age. Save these instructions and review frequently for  
continuing safe operation and instructing future users.  
RISK OF FIRE, ELECTRICAL SHOCK OR FALLING:  
locations as described by the National Fire Protection  
Association (NFPA). This heater has hot and arcing  
or sparking parts inside. DO NOT use in areas where  
gasoline, paint, or other flammable liquids or stored.  
5. This heater is intended for ceiling installation ONLY.  
The following clearances MUST be maintained:  
a) Top of heater to ceiling - 3 in (76 mm).  
b) Bottom of heater to floor - 7 ft (2.1m).  
c) Side of heater to wall - 12 in (305 mm).  
d) End of heater to wall - 12 in (305 mm).  
e) Side of heater to side of adjacent heater - 36 in  
(914 mm).  
f) End of heater to end of adjacent heater - 36 in (914  
mm).  
1. To prevent electrical shock, disconnect all power  
coming to heater at main service panel before wiring  
or servicing.  
2. All wiring must be in accordance with the National  
and Local Electrical Codes and the heater must be  
grounded as a precaution against possible electric  
shock.  
3. Verify the power supply voltage coming to heater  
matches the ratings printed on the heater nameplate  
before energizing.  
6. Heater MUST be securely fastened to the building  
structure to prevent it from falling.  
7. DO NOT stack or store combustible materials in the  
radiation path under the heater. At least 5 feet (150  
mm) clearance MUST be maintained between bot-  
tom of heater and combustibles stored.  
4. This heater is NOT suitable for use in hazardous  
SAVE THESE INSTRUCTIONS  
1
 

Lexmark Air Conditioner 12EZ User Manual
LG Electronics TV Receiver HCS5650 User Manual
Life Fitness Home Gym 883 User Manual
Lightolier Indoor Furnishings 1102TM User Manual
Mace Security Camera CAM 85PIR User Manual
Marshall Amplification Stereo Amplifier MG Series User Manual
Maxtor Computer Drive 20255400 User Manual
MB QUART Speaker PTK 40 User Manual
Melissa Bread Maker 643 032 User Manual
Metra Electronics Automobile Accessories 99 8227S User Manual