Calculite® HID Wall Wash C6T6W
Page 1 of 2
6" Aperture, T6 Ceramic Metal Halide
5
1
2
4
3
6
8
9
10
7
20" (508 mm) to
30" (762 mm)
9-3/4" (248 mm)
11" (280 mm)
(150W)
Top View
(Electronic Ballast)
9-3/8"
(238 mm)
Fixture Support Membe
5/8" (16 mm) to
2 7/8" (73 mm)
20" (508 mm) to
30" (762 mm)
9-3/4" (248 mm)
5-3/4" (146 mm) Dia.
7-7/8" (181 mm) Dia.
2" (50 mm) max.
Ceiling Thickness
Top View
(Magnetic Ballast)
Ceiling Cutout: 6 9/16" (167mm) Dia.
Reflector Trim
Frame-In Kit
Lamp
C6T6W
CLW
Specular Clear, White Painted Flange.
Specular Clear, Matching Flange.
C639T6E1
C639T6E2
C670T6E1
C670T6E2
C615T6E1
C615T6E2
C615T6U
Electronic 120V
39W T6
39W T6
70W T6
70W T6
150W T6
150W T6
Ceramic MH
Ceramic MH
Ceramic MH
Ceramic MH
Ceramic MH
Ceramic MH
Ceramic MH
CLP
Electronic 277V
Electronic 120V
Electronic 277V
Electronic 120V
Electronic 277V
CCDW
CCDP
CCZW
CCZP
Comfort Clear Diffuse, White Painted Flange.
Comfort Clear Diffuse, Matching Flange.
Champagne Bronze, White Painted Flange.
Champagne Bronze, Matching Flange.
Magnetic 120V/277V 150W T6
Electrical (Cont.)
Features
*150W Magnetic Ballast: 120V/277V dual voltage, 60 Hz., encased and pot-
ted, HX-HPF circuit type, high power factor, sound rating “B”, -20°F minimum
starting temperature, Type 1 Outdoor rating.
1. Upper Reflector: Clear anodized aluminum, 0.040" (16-ga.). Provides
wide beam optics ideal for general lighting and wall washing.
2. Downlight/Wall Washer Reflector: Provides vertical surface wall
washing and downlighting. Low brightness with 50° visual cut off to
lamp and lamp image.
Ballast
ANSI Code Voltage Max. Amps Input Watts
39W MH M130
70W MH M139
150W MH M142
* 150W MH M142
120/277 0.39/0.17
120/277 0.67/0.29
120/277 1.40/0.60
120/277 3.70/1.60
44
78
169/166
180
3. Lamp Shield: High-temperature glass as required by code, captive during
re-lamping. Light diffusion provides exceptionally smooth beam.
4. Socket Housing: Galvanized steel, pre-wired with G12 pulse rated socket.
Snaps onto upper reflector for secure attachment without tools; assures
proper lamp alignment to optics for consistent performance.
5. Mounting Frame: 0.048" (18-ga.) galvanized steel. Vertical adjustment
mechanism accommodates mounting to virtually any ceiling system using
mounting bars (provided, or 1/2" EMT tubing (by others). Single locking fea-
ture secures all adjustments. Alignment holes and markings allow fixture to
be preset prior to installation.
Options and Accessories
Chicago Plenum: Consult Factory.
Labels
cULus (Suitable for Damp Locations), I.B.E.W.
For 150W, install fixtures with minimum spacing; 3 feet from center-to center
of adjacent luminaries, 3” from top of luminaire to overhead building member;
1 1/2 feet from luminaire center to side building member.
6. Mounting Ring: 0.048"(18-ga.) galvanized steel. Designed for vertical
adjustment from above or below for ceilings from 0" to 2" thick. Center-line
notches allow consistent alignment of multiple fixtures.
7. Mounting Bars: 0.048" (18-ga.) pre-installed, telescoping bars extend to 30"
long and lock securely into position. Built-in locking tabs provide positive attach-
ment to common T-bar systems. Self-centering feature simplifies installation in
24" O.C. grid systems. Attaches to steel or wood joists without accessories.
8. Trim Retention Springs: Rust resistant springs secure reflector/housing for
quick, tool-less installation.
9. Ballast / Socket Housing / Cover Assembly: Electronic, snaps onto junc-
tion box without tools for inspection and ballast replacement, accessible
from below.
10. Junction Box: 0.048" (18-ga.) galvanized steel. UL listed for 8 No. 12 AWG,
90°C through branch circuit conductors. Allows inspection from below.
11. Thermal Protector: (Not Shown) Meets NEC and UL requirements. Do not
install insulation above nor within 3" (76mm) of any part of the luminaire.
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Electrical
Electronic Ballast: 120 or 277V, 50/60 Hz., encased, high power factor, T.H.D.
<15%, thermally and transient protected, RMI/RFI complies with FCC Part 18
non-consumer equipment, shut-down circuit at end of lamp life, sound rating
“A”, -5°F (-20°F for 150W) minimum starting temperature, Type 1 outdoor rating.
Lightolier a Genlyte company
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Group LLC • B1204
|