Lytecaster® Recessed Downlighting 1100FTUES
Page ꢀ of ꢀ
6 3/4” Aperture ꢀ Light, ꢀ20V 26/32W Triple Tube Fluorescent Frame-In Kit
2
12 5/16"
6
Frame-In Kit
1
3
4
5
9"
11 1/8"
Reflector Trim
Note: Ballast is 120V only
6 13/16" Dia.
Ceiling Opening
Complete Fixture consists of Reflector Trim & Frame-In Kit.
Frame-In Kit
Reflector Trims — See Individual Reflector Trim Specification Sheets
Open Downlight
Enclosed
Wall
Voltage
ꢀ20V
Lamp
26W and 1143
32W
1144
triple tube 1144CD 1113
Reflector
Cone
1112
1112NM
Satin Cone
Baffles
1105
1105WH
1105BNM
1105NM
1176
1176WH
1179M1
1179WH
Basic White Cross Blade Diffusers
Washer
1100FTUES
1108
1108NM
1110
1171
1132
1121
1135
1135WH
1185
1186
1186WH
1195
1170M1
1124
1126
1128
1134
1177SH
1178SH
1190
1145
1146
1113BK
1113CD
1110NM
1146CD 1113WH
1113NM
1196
1196CD
1113CDNM
Features
Options & Accessories
Mounting Bars:
T-Bar Anchor Clips:
Concealed Spline Ceiling Kit:
Plaster Ceiling Ring:
1. Mounting Frame: 0.036" (#20 ga.) galvanized steel. Accommodates all
ceilings up to ꢀ" thick; including existing or inaccessible areas. Breakout
section and anchor nails for existing ceilings. Push-in/twist-out rotoclips hold
reflector flush to ceiling.
1964 - 20" set of (2)
1956 - set of (4) for use with above bars
1965 - set of (4), ꢀ ꢀ/2” to 2 ꢀ/2” Mtg. Ht.
1960 - 7/8" depth for wet
2. Junction Box: 0.063" (#ꢀ4 ga.) 4" x 3 ꢀ/2" x 2" galvanized steel. U.L. listed
for maximum of 8 No. ꢀ2 ga., 75°C through branch circuit conductors. Integral
cable clamps permit attachment of nonmetallic Romex® or Armored cable
without the need for separate connectors.
3. Mounting Bars: 0.059" (#ꢀ6 ga.) galvanized steel. ꢀ3" long bars extend to
27", rotatable and lockable, with integral T-bar tabs. Attaches to wood joist or
T-bar ceilings without need of accessories.
plaster ceilings.
Extra-Thick Ceiling Mounting Ring: 1967A - up to 2" thick ceilings.
Remodeler Anchor Clip:
1985S
Labels
UL (Suitable for Damp Locations), I.B.E.W.
Romex® is a registered trademark of General Cable Industries Inc.
4. Socket Housing: Steel precisely attached to reflector by spring clip.
5. Socket: Four-pin base, molded thermoplastic. Prewired with No. ꢀ8 AWM
leads to junction box.
US Patent No's.: 5,045,985
Job Information
Type:
6. Ballast: Electronic ꢀ20V, end of lamp life protected, FCC class “B” consumer
limits, class “A” sound rating. Energy Star® qualified. Insulation must be kept
3" away from fixture sides and wiring compartment and must not be placed
above fixture in a manner which will entrap heat.
Job Name:
Cat. No.:
Lamp(s):
Notes:
Electrical
26W
32W
Input Volts:
Input Watts:
Amps:
ꢀ20V
29
.24
ꢀ20V
36
0.3ꢀ
Minimum starting temperature is 0°F.
Lightolier a Genlyte company
63ꢀ Airport Road, Fall River, MA 02720 • (508) 679-8ꢀ3ꢀ • Fax (508) 674-47ꢀ0
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • C0906
|