Lytecaster® Recessed Downlighting 1000IC
Page 1 of 1
5" Aperture Incandescent Insulated Ceiling Frame-In Kit
Ceiling
Opening
*
Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
Frame-In Kit Reflector Trims — See Individual Reflector Trim Specification Sheets
Open Downlight
Recessed
Satin
Cone
Basic
White
Enclosed Open
Diffusers Wet Location Washer
Wall
Reflector Cone
Baffles
Adjustable
Eyeball
1000IC
1045
1012
1008
1005
1071 1027
1029
1022
1021
1084CD
1035
1000ICM*
1046
1046CD
1012NM
1013
1008NM 1005NM
1010 1005BNM
1027CD
1027NM
1029CD
1029NM
1022WH 1024
1023 1078
1084WH
1035WH
1085
1013CD
1013BK
1013WH
1013NM
1013CDNM
1013BKNM
1010NM 1005WH
1076
1027CDNM 1029CDNM
1027BK 1029BKNM
1027BKNM 1029GDNM
1023WH 1090
1082
1095
1096
1096CD
1076WH
1027WH
1038
1029CLNM
1029CL
1038NM
1048
1029GD
1029BK
1048NM
1029BNM
1029WH
*3/8” Integral Plaster Lip
Features
Options & Accessories (continued)
1. Housing: .026" (#20 ga.) galvanized steel. U.L. listed for direct contact with
thermal insulation. Access door for inspection of junction box.
2. Mounting Frame: .036” (#20 ga.) galvanized steel. Accommodates all
ceilings up to 1” thick. ICM version has 3/8" deep integral lip. Four slots are
positioned 90º apart to simplify alignment. Push-in/twist-out rotoclips hold
reflector flush to ceiling.
Extra-Thick Ceiling
Mounting Ring:
1967B - up to 2" thick ceilings.
277 Remove Step-Down Transformer
7997 - 277Vdown to 120V
300W max.load.
Labels
UL (Type I.C., Suitable for Damp Locations), I.B.E.W.
3. Junction Box: 2" x 4" x 4", .063" (#14 ga.) galvanized steel. U.L. listed for,
maximum of 6 No. 12 ga., 90º C through branch circuit conductors. Quick
release “L” shaped cover for outside access to wiring. Access door inside of
housing allows easy inspection of wiring without removal of housing. Integral
cable clamps permit attachment of nonmetallic Romex® or armored cable
without the need for additional connectors.
4. Mounting Bars: .059" (#16 ga.) galvanized steel. 13" long bars extend to
27", rotatable and lockable, with integral T-bar tabs. Attach to wood joist or
T-bar ceilings without need of accessories.
Romex® is a registered Trademark of General Cable Industries Inc.
US Patent No.: 5,045,985; 4,751,624
Job Information
Type:
Job Name:
Cat. No.:
5. Socket Housing: Impact extruded aluminum or galvanized steel.
6. Socket: Porcelain medium base; nickel plated screw shell. Pre-wired with
#18 ga. SF1 leads to junction box.
7. Thermal Protector: Meets NEC and U.L. requirements. Located inside
housing.
Lamp(s):
Notes:
Options & Accessories
Mounting Bars:
1964 - 20" set of (2)
T-Bar Ceiling Clips:
Plaster Ceiling Ring:
1956 - set pf (4)
1960 - 7/8" depth for wet plaster ceilings.
Not for use with ICM housing.
Lightolier a Genlyte company
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC •G0906
|