Zero Turn Mowers,
®
Accu-Z Razor
Features and Benefits
Zero Turn Mowers, Accu-Z Razor®
Z44 & Z52 Series (S/N 526171+)
Features
44” or 52” Cutting width
Ground speed
Benefits
Sized and priced right for residential owners.
Forward 0-7 mph and Reverse 0-5 mph for high mowing productivity
Mid-mount deck design
Mid-mount design puts the deck closer to the operator’s line of sight for a more efficient and
precise operation.
Compact size
Enhances mowing maneuverability, as well as fitting on trailers or storing more efficiently.
Drive tire stance
Narrow width (44: 44”, 52: 45”) allows for tight turns in corners, yet gives a very stable platform
for the operator.
Steering levers designed for
more adjustment and comfort
Steering levers are designed with more adjustments to fit more comfortably to operators of all
sizes. Also new comfort grip handles are standard equipment.
Stamped reinforcing ring added Makes a stronger deck and reduces unwanted flex.
to deck construction
Deck construction
Single welded frame design. 11 Gauge with 1” x 3/8” reinforcements.
Floating deck design
Deck height adjustment
Deck has chain suspension which offers excellent flotation over uneven terrain.
Height is changed by a spring-loaded foot operated lever and pin. Easier than hand levers to
push and faster than waiting on an electric actuation.
Anti-scalp rollers - 4
Cutting height
Tires
Front middle and front corners to keep scalping to a minimum.
1 1/2” to 4 1/2” Range in 1/4” increments to cut any type of turf grass.
Wide tires offer excellent ground flotation. Heavy wheel forks take abuse.
44" = 16,811 fpm and 52" = 18,937 fpm (Assures a good finish cut.)
High blade tip speed
High lift blades
Heavy-duty high lift blades are .20” thick to handle the wear, with a high lift design to stand the
grass up before cutting. Made from highest quality ™Marbain steel for longer blade life.
1” Blade spindles
Single belt drive
1” Blades spindles with ball bearings handle heavy shock loads.
Single belt design offers easier maintenance over multiple belt designs, less expensive to
maintain.
Electric clutch control
Easy and smooth engagement of the mower blade drive system.
TM
Hydro-Gear ZT-2800
Each mower has a homeowner friendly integrated hydrostatic transaxle containing a pump and
drive motor for each rear wheel. Except for changing hydraulic filters, these units are self
contained and are maintenance free.
(Zero-Turn Transaxle)
drive unit on each rear wheel
Choice of Engines
Makes it possible for you to buy more value, performance and power for your dollar.
44" Deck: 22 hp Briggs & Stratton, 18 hp Honda
52" Deck: 22 & 26 hp Briggs & Stratton, 18 & 20 hp Honda
The engine is centered
and oriented for maximum
ease of service.
Engine orientation provides for increased air flow around engine fins to help extend engine life.
Also it provides for a shorter overall mower length with more leg room available. Spark plugs,
air cleaner, choke and throttle can be serviced from the rear verses the side. The muffler is
located to reduce potential burn hazard and to lower sound level at the operator’s station.
Electric start
Easily starts with the turn of a key.
Pumps stay cool.
Integrated fan blades
Sleek styling twin six-gallon
molded fuel tanks with extra
large inboard fuel caps.
Twin six-gallon tanks (12 gallons total) with selector valve for extending operating range and
decreasing down time. Extra large fuel openings for easy fueling. Inboard positioning of fuel
caps so they don’t come off during operation.
Molded-in dual cup holders and Cup holders fit a wide variety of cups and are in easy access to driver. Storage compartments
offer additional operator convince.
storage compartments
Seat options
Molded seat incorporates a high back to give adequate comfort for the long jobs or Deluxe
Cushion seat for additional suspension over rough terrain.
Integrated park brake
Spread steering levers fully out; this automatically sets the Park Brake. No separate lever to
hunt for.
Designs, specifications, features and information are subject to change without notice.
4/14/08
84
357-187F
|