SCARIFIeRS
SF25 SERIES
25 - 50 HP — 66” 77”
• Cat. 1 hitch
• Four ripping depths
• Heat treated steel shanks
• Replaceable shank tips
All Land Pride Scarifiers
feature a 5/16” wall
thickness on the
shank tube for high
tensile strength, and a
5/16” x 1” full length
reinforcement bar.
• Rear hitch with floating top link
for second implement
The Land Pride Scarifier
can work in unison with our 3-point 15 and
25 Series Landscape Rakes and Rear Blades.
Scarifier Specifications
Model/Number
SF2566
66" (168)
60" (152)
208 lbs.(94)
SF2577
77" (196)
Width (cm)
Working Width (cm)
Approximate Weight - lbs. (kg)
Horsepower Rating - engine
Hitch Type
72" (183)
20
235 lbs.(107)
Up to 50 (37)
Cat. I
No. of Shanks
6
7
Shank Type (mm)
3/4" x 2 1/2" (19 x 63.5) Heat Treated, Spring Steel Dimpled-On Tips
Maximum HP Rating based on 2WD specifications.
Landscape Rake Specifications
LR1560
LR1572
LR1584
LR1596
LR2572
LR2584
84" (213)
50 HP
LR2596
LR3584
LR3596
Model/Series
LR0548
LR0560
LR0572
60" (152) 72" (183)
84" (213)
96" (244)
72" (183)
96" (244)
84" (213)
96" (244)
Rake Width (cm)
Maximum HP Rating
Hitch Type
48" (122) 60" ( 152)
25 HP
72" (183)
35 HP
Cat. I
65 HP
Cat. I, II
Cat. I
Cat. 0 w/Cat. I Pins or Pull Type
5 Forward Up to 30°
5 Forward Up to 30°,
7 Rev. up to 45°
N/A
7 Forward Up to 45°,
5 Rev. up to 45°
N/A
9 Forward Up to 60°,
5 Rev. up to 60°
45° Swing 24" (61) Offset
Manual or Hydraulic
42
Angle/Position
Offset (cm)
N/A
30
36
42
48
36
42
48
48
No. of Teeth
26
34
40
2" (50.8) Centers
High Carbon
2" (50.8) Centers
High Carbon
Spring Steel
2" (50.8) Centers
High Carbon
Teeth Spacing (mm)
Teeth Material
1 3/4" (44.45) Centers
High Carbon
Spring Steel
Spring Steel
Spring Steel
5/16" x 1" (0.79 x 2.54)
16 1/2" (41.91)
5/16" x 1" (0.79 x 2.54)
16 1/2" (41.91)
5/16" x 1" (0.79 x 2.54)
16 1/2" (41.91)
Tooth Size (cm)
1/4" x 3/4" (0.64 x 1.91)
12" (30.48)
Rake Height (cm)
241 (109) 270 (122)
291 (132)
316 (143)
328 (149) 352 (160)
377 (171)
460 (209)
483 (219)
Appx. Wt.-3 Pt. lb (kg) 98 (44)
Options
98 (44)
113 (51)
115 (52)
8" x 1.75"
123 (56)
123 (56)
Dual Gauge Wheels 13" x 4" x 6" and
13" x 6.5" x 6"
Single Gauge Wheel 8" x 4" x 4.8"
Dual Gauge Wheels 13" x 4" x 6" and
13" x 6.5" x 6", *Flip-Down Grader Blade
Hydraulic Angle Cylinder
Single Gauge Wheel 8" x 4" x 4.8"
Dual Gauge Wheels 13" x 4" x 6"
and 13" x 6.5" x 6"
*Flip-Down Grader Blade
*Flip-Down Grader Blade
*Flip-down grader blade must be used in conjunction with dual gauge wheels. Maximum HP Rating based on 2WD specifications.
|