• Suitable for fire detection control
panels Series BC216 and BC016
• Parameters for function and baud
rate can be freely set
• Selective event output by means of
filters
• Monitoring of the data line
• Galvanic separation
Description
The Serial Interface Module SIM216-1 provides fire de- The SIM216-1 occupies one of the two slots for serial
tection control panels Series BC216 or Series BC016, interfaces in fire detection control panels Series BC216.
respectively, with a galvanically separated RS232C in- In BCnet sectional control panels, only one SIM216-1
terface. Devices with a serial interface (e.g., protocol module can be installed because one slot is always
printer, PC with parameter setup software or electronic used by the Network Interface Module for communica-
monitoring system) can be connected to the fire detec- tion with the other BCnet sectional control panels. In
tion control panel with the aid of the componentry. The BC016 fire detection control panels, only one slot is
transfer rate can be adjusted, if required.
designated for the installation of the Serial Interface
Module SIM216-1.
Specifications
Current consumption at 24V
Interface
typ. 10mA
RS232C, galvanically isolated, up to 57.6kBaud
RxD, TxD, CTS/DTR
D-SUB plug, 9-pin
Signal lines
Connection type
Ambient temperature
Dimensions L × W × H
Weight
-5°C to +50°C
70 × 45 × 20 (mm)
50g
Part No.
214025
Order name
Serial Interface Module SIM216-1
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
SIM216-1_DBL_LST_EN_0804.PDF • PAGE 1
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
|