• 1-loop version of BC216-1
• For the application in small systems
• Analogue ringbus technology with
unshielded detector cabling
• Menu-driven operation
• Easy commissioning through
AUTO setup
• 32–bit multiprocessor system
• EN 54/VdS-certified
Fire is a permanent threat to life and property. There- ted within LST premises, thus guaranteeing flexible and
fore, immediate response to a fire is imperative. The reliable individual solutions.
main objective of fire detection control panel Series
BC216 is to alarm and to react in time and, conse- Using a 32-bit multiprocessor system, the fire detection
quently, save lives and protect property. For decades control panel Series BC216 ensures topmost efficiency
LST have focused their aims to undertaking unrivaled and speed – prerequisites for saving lives and minimi-
efforts in order to realize new innovations in the security zing damage to property.
area. Research, development and production are loca-
Description
The fire detection control panel BC216–1S is designed ted into the ADM loop, if required, by means of conven-
to be used in small systems with only one ADM loop. It tional zone modules.
comprises an already completely mounted unit which
includes all basic components that are needed for the Depending on the respective system, a Fire Brigade In-
operation of a 1-loop fire detection control panel.
terface FWI2-1, a Fire Brigade Interface Additional Board
Slot 1 is by default equipped with a Loop Interface FWZ2-1, an LED-Display Field LAB48 as well as further
LIF64-1 for the connection of an ADM loop, slot 2 is optional componentries can be installed in addition.
inoperable.
Easy parameterisation on the control panel‘s display
The ADM loop principle offers intelligent analogue ring- and operating unit, via a PC keyboard, or by means of
bus technology with bi-directional data transfer. The a PC software enables you to tailor the control panel to
loop provides for the software-aided administration of your individual requirements.
up to 198 physical address points in a maximum of 128
detector zones. Conventional detectors can be integra-
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
BC216-1S_DBL_LST_EN_0804.PDF • PAGE 1
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
Permanent Connection
A variety of peripheral devices can be connected to the
fire detection control panel BC216-1S:
• Fire brigade key safe
• Actuations
• Fire brigade control unit
• Acoustic and optical signaling devices
• External protocol printer
• Remote indication unit
• Modules for remote parameterisation and remote
maintenance via computer newtork, modem or GSM
connection
– and much more.
Specifications
Mains voltage
230VAC +10/-15%, 50Hz
60VA
Connection power
Output voltage
typ. 28VDC
Output peak current
Connection of external devices
Own current consumption at 24V
Ambient temperature
Dimensions W × H × D
Colour
max. 1.8A
typ. 0.8A, site-specific
typ. 115mA (incl. LIF64-1, without detectors/modules)
-5°C to +50°C
420 × 520 × 120 (mm)
gray-white, RAL 9002
approx. 6kg
Weight without accumulator
Approvals (EN 54-2, EN 54-4)
VdS G201017
FT 14/147/3/99 (Austria),
Order name
Fire detection control panel BC216-1S
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
BC216-1S_DBL_LST_EN_0804.PDF • PAGE 3
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
|