Contents
Camera Specifications
• High Resolution Color Camera with cable pass-
through stand
Image Sensor
Video Format
Effective Pixels
Resolution
1/3” Color Image Sensor
NTSC
• Mounting screws x 3 / Allen key x 1
• 60ft BNC / power extension cable
• BNC female / RCA male adapter
• Power adapter
HIGH RESOLUTION
IR NIGHT VISION CAMERA
H: 720 V: 480
540 TV Lines
2:1 Interlace
Internal
Quick Start Guide
Scan System
Sync System
S / N Ratio
Iris
English Version 1.0
WARNING - A REGULATED UL / CSA APPROVED power supply is
REQUIRED for use with this camera. Use of a non-regulated, non-conforming
power supply can damage this product and voids the warranty.
48dB (AGC Off)
AES
AES Shutter Speed
Min. Illumination
1/60 ~ 1/25,000 sec.
Features
• High resolution 1/3” image sensor produces 540TV lines of
0.1 Lux without IR LED
0 Lux with IR LED
resolution
• Night vision up to 50ft (15m) away in total darkness*
• Anti-glare feature ensures clear images under strong lighting
conditions
• Accurate colors with Lorex’s automatic light-filtering technology
• Split glass design minimizes IR reflection
• See more with 3.6mm wide viewing angle lens (78° FOV**)
Video Output
Composite 1.0Vpp @ 75ohm
3.6mm F2.0 / Fixed
78°
Lens / Lens Type
FOV (Diagonal)
Termination
BNC Type
• Vandal-resistant design: cable pass-through bracket protects
IR LED Qty. / Type
Night Vision Range*
Power Requirement
18 pieces / 850nm
50ft / 15m
connection cables
• IP66 rated aluminum housing for indoor / outdoor
installations***
12V DC 10%
Disclaimers:
* Infrared illumination range under ideal conditions. Actual range and clarity may vary
depending on scene / object reflection and camera application.
Power Consumption
Max. 300mA (w / IR)
14° ~ 122°F / –10° ~ 50°C
< 90% RH
** Field of View, diagonal
*** Not intended for submersion in water. Installation in a sheltered location recommended.
Operating Temp. Range
Operating Humidity Range
Environmental Rating**
Weight (including stand)
Warning/Caution
IP66
• Read this guide carefully and keep it for future reference
0.8lbs / 0.4kg
• Follow all instructions for safe use of the product and handle
with care
• Use the camera within given temperature, humidity and voltage
levels noted in Camera Specifications
* IR Illumination Range under ideal conditions. Objects at or beyond this range may be partially or
completely obscured, depending on the camera application.
** Not intended for submersion in water. Installation in a sheltered location recommended.
• Do not disassemble the camera
• Do not point the camera directly towards the sun or a source of
intense light
• Use only the supplied regulated power supply. Use of a non-
regulated, non-conforming power supply can damage this
product and voids the warranty
• Periodic cleaning may be required. Use a damp cloth only. Do
not use harsh cleaners or aerosol cleaners.
Dimensions
189mm / 7.4”
67mm / 2.6”
60mm / 2.4”
• The supplied extension cable is rated for surface mounting only
• Cables for in-wall / floor-to-floor installations are sold separately
FOR SUPPORT AND INFORMATION,
Installation Tips
VISIT WWW.LOREXTECHNOLOGY.COM
• Point the camera where there is the least amount of obstructions
(i.e. tree branches)
• Install the camera in a location that is difficult for vandals to
reach
Product Information
Specification Sheets
LBC5450
User Manuals
Software Upgrades
• Secure cabling so that it is not exposed or easily cut
• Camera rated for outdoor use. Installation in a sheltered location
recommended
Quick Start Guides
Firmware Upgrades
Copyright © 2012 Lorex Technologies Inc.
As our products are subject to continuous improvement, Lorex reserves the right to modify product
design, specifications and prices, without notice and without incurring any obligation. E&OE
|