MODEL: ACC-HDB / ACC-HDB80
EXTERNAL IDE HDD BAY
THIS PACKAGE CONTAINS:
NOTE::
1 - HDD (Hard Disk Drive) Bay
1 - 12V DC Power supply
1 - 2 keys for cartridge
1 - 40 pin interface cable
1 - Owner’s Manual
Model ACC-HDB does not
include a HDD
Model ACC-HDB80
includes a 80 GB HDD
INTRODUCTION:
Congratulations on purchasing the External IDE HDD Bay. This external hard drive bay facilitates recording to
a Slave HDD from a DVR system with an IDE Sub input. The system has a 12V DC power supply, power
switch, a 40 pin cable interface input and a removable cartridge casing to easily install or remove your hard
disk drive.
This external hard drive bay, when equipped with a correctly set hard disk drive, can be used as a slave back-
up drive for a DVR system when the master drive is full.
To learn more about this External IDE HDD Bay and other HDD units, please visit our website at:
CAUTIONS:
1. All the warnings and instructions of this manual should be followed
2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use water
damped cloth for cleaning
3. Do not use this unit in very humid and wet places
4. Keep enough space around the unit for ventilation. Slots and openings of the cabinet should not be
blocked.
5. During flashes of lightning or cracks of thunder, or when the system is not used for a long time, unplug
the system power supply and disconnect the antenna and cables to protect the unit from lightening or
power surges.
FEATURES:
• Easily connects to any DVR or DVR combo unit with a 40 pin IDE Sub input
• Comes with its own power supply for easy connection to your DVR
• 2 keys to lock cartridge
• Supports 20 to 250 GB HDD
TROUBLESHOOTING:
If the system does not function properly, please check the following points:
PROBLEM
SOLUTION
Slave HDD not readable
HDD not found
Check the jumper PIN connection.
Activate the Slave HDD in the DVR or DVR Combo’s Menu
options.
(See the Owner’s Manual for the DVR or DVR Combo).
Re-insert HDD as per instructions on “Installing the HDD”.
Make sure that the HDD cartridge is locked.
Check the jumper setting, it must be set to SLAVE.
Keypad doesn’t work
Recording stopped
Remove the Key Lock
The HDD is Full, and Overwrite is not
enabled
SPECIFICATIONS
HDD capacity:
250GB (Max.)
Interface Cable:
Outer Case:
40 pin IDE (30 cm, 11.8 inches)
Steel Construction
Power Supply:
Dimensions:
12V DC, 1.0A
5.9”(W) x 3.8”(H) x 8.9”(D)
Distributed By:
STRATEGIC VISTA CORP.
300 Alden Road, Markham, Ontario, Canada L3R 4C1
As our products are subject to continuous improvement, SVII and its subsidiaries reserve the right to modify product
design, specifications and prices, without notice and without incurring any obligation. E&OE
|