Model(s):
GR-382R
REFRIGERATOR-
FREEZER
OWNER'S MANUAL
READ THIS MANUAL THOROUGHLY BEFORE
USING THE APPLIANCE AND KEEP IT HANDY
FOR FURTHER REFERENCE.
P/NO. 3828JL8001D
THIS REFRIGERATOR IS MANUFACTURED WITH EXTREME CAUTION USING THE
LATEST TECHNOLOGY.
WE ARE CONFIDENT THAT YOU WILL BE COMPLETELY SATISFIED WITH IT’S
PERFORMANCE AND RELIABILITY.
BEFORE USING YOUR REFRIGERATOR, PLEASE READ THIS MANUAL COMPLETELY.
IT INCLUDES THE EXACT INSTRUCTIONS FOR INSTALLATION, OPERATION AND
MAINTENANCE ALONG WITH SOME USEFUL TIPS.
INSTALLATION
1. Install in an appropriate location.
NEXT
Place the refrigerator where it is easily
accessible.
1. Clean your refrigerator and remove dust
accumulated during transportation.
2. Avoid placing your refrigerator near heat sources,
direct sunshine, or areas of high humidity.
2. Install all accessories, such as ice trays, in the
correct places.
3. There must be an appropriate air flow
around your refrigerator in order to get a good
performance. If your refrigerator is placed close
to the walls, it must have a clearance of 10"
on top and 2" on both sides.
They are packed together to prevent damage
in transit.
3. Follow the instructions for handle assembly.
4. After moving the refrigerator, wait an hour
before plugging it in to allow the oil to settle
in the compressor.
The refrigerator must have a 1” clearance from
the floor, specially if it’s carpeted.
4. To avoid problems, the refrigerator should be
properly leveled. If necessary, adjust the leveling 5. Connect the power cord to the power outlet.
screws.
Do not connect more than one appliance to the
The front must be slightly higher than the back so
the doors will close properly.
The leveling screws are easier to turn if you lean
the refrigerator slightly backwards. Turn the
leveling screws clockwise to raise the front of the
refrigerator and counterclockwise to lower it.
same outlet.
If your refrigerator's power cord has 3 terminals,
DO NOT remove the ground terminal.
Grounding minimizes the risk of electric shock.
This connector requires a 3-terminal power outlet.
If the customer does not have the proper outlet,
he must contact a qualified electrician to have the
proper outlet installed.
5. Install the refrigerator in a place where the
temperature is between 50° F (10°C) and 104° F
(40°C). If the temperature is higher or lower, the
cooling performance of the appliance can be
diminished.
5. Before using your refrigerator, let it run for 2 or 3
hours.
Verify the cold air flow at the freezer to ensure
proper cooling. Now your refrigerator is ready to
use.
3
FEATURES
FREEZER
Temperature
Control
Shelf
Freezer
Door Baskets
Ice Trays
Twist’n Serve
REFRIGERATOR
Door Cooling
(Air Flow from
Temperature
Control
the door.)
*
Fresh Meat
Tray
Bottle Guide
*
Lamp
Shelves
(Plastic or Glass)
Deodorizer
(Absorbs
Odors)
Refrigerator’s
Door Baskets
*
Multi Air Flow
Air flow distributor
Vegetable Tray
(Keeps fruits and
vegetables fresh)
Leveling
Screws
Magic Crisper
(Vegetable Tray cover
that control humidity)
All parts listed may not be included on your model.
*
MODEL(S):
GR-382R
4
OPERATION
START UP
When your refrigerator is installed or relocated, let it stand for an hour before starting it.
Then let it run for 2 or 3 hours to stabilize the internal temperature before filling it with food.
If power is interrupted, allow 5 minutes to pass before restarting.
BEFORE CONFIGURING THE TEMPERATURE
i This refrigerator has a temperature control button for the refrigerator compartment and a selector
for the freezer compartment.
i · The basic configuration for the refrigerator's temperature control is in the middle; that is, the first
three LEDs are turned on.
i The basic configuration of the temperature selector at the freezer compartment is “4”.
REFRIGERATOR COMPARTMENT CONTROL
i You can adjust the refrigerator compartment's temperature using the
Ref. Temp Control button. Each time you press the button, one LED
should illuminate until it reaches Max. Continuing to press this button
will continue to cycle through all settings from Minto Max and around again.
i The refrigerator compartment's temperature is indicated by the number of
LEDs illuminated, from Minto Max. Minis warmer and Max is cooler.
i You can select the desired temperature with this control.
i To conserve energy, set the control to Min. (first LED on)
FREEZER COMPARTMENT CONTROL*
i COLD AIR CONTROL - 1, 2, 3, 4, 5, 6, 7, 8, and 9
By placing the selector on 9, the freezer will be colder but the food stored
in the refrigerator compartment will cool more slowly because of the
diminishing air flow.
i In cold weather, the compressor's running time is reduced and the
freezer compartment tends to be a little warmer.
To keep the freezer colder, set the TEMP CONTROL between 6 and 9.
i· If there is much food stored in the freezer or the door is opened
frequently, its temperature will be a little bit warmer.
In this case, set the TEMP. CONTROL between 6 and 9 to make it colder.
Set the TEMP. CONTROL to its original position to reduce the energy
consumption.
i In hot weather, or when much food is stored in the refrigerator, it tends to be a little bit warmer.
iTo make it cooler, turn the TEMP. CONTROL between 2 and 4 to direct more air to the refrigerator and
place the REF. TEMP. CONTROL at the MAX position. If the TEMP. CONTROL is sebetween 6 and 9
at the freezer compartment, the refrigerator will cool very slowly.
5
OPERATION
SELF-DIAGNOSIS
i The electronic control system includes a self-diagnostic mode. When an error is detected, it is
is displayed on the control box LEDs. It is not possible to adjust the controls while an error message
is displayed.
i When this happens, do not disconnect the power cord from the outlet and call a service center
immediately.
ICE MAKING -TWISTING TYPE-
iTo make ice cubes, fill the trays with water and insert them on their
position.
iTo remove the ice cubes, twist the tray’s knob and the cubes will fall into
the ice bank instantly.
iYou can detach the “Twist’n Serve” to increase the freezer’s storage
capacity. First take out the ice trays and the cube box, then pull the frame
to the right side.
DOOR BASKET COOLING
(Some models)
iThe cold air flow from the door makes the cooling of the beverages placed
on the door baskets faster and more efficient.
iWhen new food is placed in the door basket, the cooling time decreases due
to the cold air flow in this area.
iWhen water or other strange object gets into the air flow area when
cleaning or any other moment, the cooling performance drops down. Also,
performance can be lowered by air leakages due to door gasket damage.
FRESH MEAT TRAY
iWhen the door is opened, the warm air does not affect the fresh
meat located inside the tray. Consequently, food can be kept
fresher for longer time.
iThe fresh meat tray and shelf must be placed in the correct position.
If they are moved, they won't serve their purpose.
iWhen water or other strange object gets into the air flow area, the
cooling performance drops down.
DEFROSTING
iDefrost is carried out automatically.
iThe water generated during the defrosting flows down to the drip tray located
at the back part of the refrigerator and its evaporated automatically.
6
REVERSIBLE DOOR SWITCHING
Caution
1. The door can be reversed according to the user’s needs or preferences.
2. Before reversing doors, remove all food and accesories placed in the baskets.
3. Use a hexagonal screw driver to loosen the screws.
4. Be very careful when removing the lower hinges’ screws, the refrigerator could fall down.
5. Do not lay the refrigerator on its side when switching the doors. This could cause a malfunction
or damage.
6.Be careful when switching the doors; they could fall and cause damage or injury.
HOW TO REVERSE THE DOOR
(To switch the opening from right side to left side)
2
Remove the freezes door (3)
1
Remove the upper hings
cover (1) and then remove
the screws (2).
3
Remove the center hinge (4) and then
the refrigeratos door (5).
4
Remove the lower hinge (6) .
7
REVERSIBLE DOOR SWITCHING
5
Switch the leveling screws.
6
Assemble the lower hinge (6)
8
Assemble the central hinge (4) on
7
Switch the cap (8) to cover the hole where
the other side and switch the hole
cover cap (10).
the hinge is inserted in the door cap decoration.
8
SUGGESTIONS ON FOOD STORAGE
STORING FOOD
iStore fresh food in the refrigerator and the freezer. Defrosting is an important factor in preserving
freshness and flavor.
iDo not store food that can decompose under low temperatures such as bananas, melons or pineapple.
iAllow hot food to cool before storing it. Placing hot food in the refrigerator damages other food
and increases energy consumption.
iWhen storing food, wrap it with vinyl film or store it in closed containers. This prevents food moisture
from evaporating and keeps food fresh.
iDo not obstruct the cold air outlets with food. The cold air flow keeps the refrigerator temperature even.
iDo not open the door frequently. Opening the door allows hot air into the refrigerator, raising the
temperature.
iTo adjust the temperature controls easily, keep the area near the controls clear.
FREEZER
iDo not store glass bottles in the freezer - they can break when frozen.
iDo not freeze food that has been already thawed. They may lose their nutritional properties.
iWhen storing frozen food for a long period, such as ice cream, place it on the shelves and not in
the door baskets.
REFRIGERATOR
iAvoid storing high humidity foods at the back of the refrigerator. They could freeze in contact with
the cold air. Store in a closed container instead.
iAlways clean food before refrigerating it. Fruits and vegetables should be washed and dried.
Packaged food should be dried to avoid contaminating adjacent items.
iStore eggs on the highest shelf in the refrigerator.
i If the refrigerator is placed in a hot and humid place, it’s door is opened
frequently, or if many vegetables are stored in it; dew may form on the
inside walls of the refrigerator. This does not affect its performance. Just
remove the dew with a dustfree cloth.
9
CLEANING
INTERIOR PARTS - Wash the shelves,
door baskets, storage trays, magnetic door
with a damp cloth in a solution of one (1)
teaspoon sodium bicarbonate (baking soda)
It is important that your refrigerator is kept clean
to avoid unwanted odors. Spilled food must be
cleaned immediately because it could stain the
plastic surfaces.
Never use metal fibres, brushes, abrasive
cleaners or alkaline solutions over any kind of
surface.
dissolved in one (1) quart of warm water.
Rinse the surfaces with a damp cloth and dry.
WARNING
Always unplug the power cord from the power
outlet before cleaning in the vicinity of
electrical parts (lamps, switches, controls, etc.)
Wipe out excess moisture with a sponge or
cloth to prevent water or liquids to contacting
an electric part and cause a short circuit. Do
not use flammable or toxic liquid cleaners.
Before cleaning, remember that wet objects can
stick to extremelly cold surfaces. Do not touch
frozen surfaces with bare, wet hands .
EXTERIOR - Use warm water and a mild
detergent solution to clean the surfaces of your
refrigerator. Clean it with a damp cloth and dry it.
INTERIOR - A regular cleaning of the interior is
recommended. Use a damp cloth in a solution
of one (1) teaspoon sodium bicarbonate (baking
soda) dissolved in one (1) quart of warm water.
Rinse the surfaces with a damp cloth and dry.
GENERAL INFORMATION
IF YOU MOVE
ON VACATIONS
Remove or fix all loose articles inside the
refrigerator.
During average length vacations, probably prefer
to leave the refrigerator running.
To avoid damaging the leveling screws, turn
them until they reach the base.
Some foods may be frozen for extended storage.
If you plan to be away for an extended period,
remove remove the food, disconnect the power
cord, clean the interior (as described above,)
and block the door open to prevent odors.
ANTI-CONDENSATION
PIPE
POWER FAILURE
Anti-Condensation
Most power failures are fixed within one or two hours
and won’t affect your refrigerator’s temperatures.
However, you should minimize the door openings
while the power is out.
During long term power breakdowns place an EPS
bar over your stored food, this will help to keep them
fresh for longer time.
Pipe
The outside of the
refrigerator may become
hot, especially immediately
after installation and
start-up.This is normal.
It is caused by the anti-
condensation pipe which
pumps hot refrigerant
to prevent condensation
on the outer cabinet.
10
LAMP REPLACEMENT
REFRIGERATOR LAMP
1. Unplug the refrigerator’s power cord.
2. Remove the refrigerator compartment’s shelves and
the vegetable tray cover.
3. To remove the lamp cover, pull the lower part with your
hand or a tool.
4. Twist the light bulb counterclockwise.
5. Assembly on the opposite way as disassembly.
The replacement light bulb must be the same
specification of the original. (125V, 20W). Part No. 6912JB2002J
IMPORTANT WARNINGS
ABOUT GROUNDING (EARTHING)
DO NOT USE AN EXTENSION CORD
In the event of a short circuit, the ground
connection reduces the risk of electric shock
while providing an escape line for electric current.
Do not connect any other appliance in the same
plug of the refrigerator, if many appliances are
connected the wires might be overloaded,
increasing the risk of voltage variation and
improper operation.
Prevent
a
possible electric shock, this
appliance must be grounded.
POWER CORD REPLACEMENT
If the power cord gets damaged, you must replace
it for a new one available with the manufacturer or
its service agent.
The wrong use of the plug’s earth terminal can
result in an electric shock. Consult a qualified
electrician or service person if the grounding
instructions are not fully understood, or if you
have any doubts about if your appliance is
properly grounded.
DANGER
RISK OF CHILD ENTRAPMENT
An empty refrigerator can be a very dangerous
attraction for children. Before you throw away
your old refrigerator or freezer, please take off
the doors and leave the shelves in place so
that children may not easily climb inside.
This appliance must be grounded
DON’T WAIT! DO IT NOW!
NEVER STORE EXPLOSIVE
OR CHEMICAL SUBSTANCES IN
YOUR REFRIGERATOR.
Please do not let the area near the door
switch get dirty by sweet food or candy, as
ants could interrupt the normal operation of
this switch.
11
BEFORE CALLING FOR SERVICE
SERVICE CALLS CAN OFTEN BE AVOIDED!
IF YOU THINK YOUR REFRIGERATOR IS NOT WORKING PROPERLY, FIRST VERIFY THESE
POSSIBLE CAUSES:
PROBLEM
POSSIBLE CAUSES
• Did a fuse blow or a circuit breaker trip?
• Is the power cord loose in the connector or unplugged?
• Check your electric plug for damage. Connect another appliance
or lamp to make sure the outlet works.
• Make sure your circuit is not overloaded. The refrigerator should
be on its own circuit. Unplug other appliances that are overloading
the circuit and causing voltage drop or other electrical problems.
REFRIGERATOR IS NOT
WORKING
• The temperature control is not in the right position.
• The appliance is located near the wall or a heat source
(stove, sun rays, etc.)
THE TEMPERATURE IN THE
REFRIGERATOR
COMPARTMENT OR FREEZER
COMPARTMENT IS TOO HOT.
• Hot weather - Frequent door openings.
• The door is not completely closed. Check to ensure there is no
damage to the gasket or some item blocking the door.
• The door is left open for long time.
• Large food amounts are stored in the refrigerator.
• The refrigerator is placed over an uneven or weak surface, or the
leveling screws need to be adjusted.
• Unnecesary objects are placed on the back side of the
refrigerator.
• If a voltage drop occurs check if the bulbs’ light is low, if so, call
your electricity company to get the failure fixed.
ABNORMAL NOISE (S)
• Fragrant food must be stored in closed containers or wrapped.
• The interior needs to be cleaned.
• Check that the deodorizer is clean and if needed, expose it to the
sun for a couple hours to re-charge it.
THE REFRIGERATOR KEEPS
BAD ODORS
It is normal when the humidity is high.
The door may have been left ajar.
DEW FORMS ON THE
CABINET SURFACE.
• Temperature controls are set to the Maximum, please set them to
Medium.
• Check that doors are closed properly.
• Hot food is stored.
• Doors are left open for long periods of time.
• The refrigerator is too close to a heat source or sun rays.
COMPRESSOR OPERATES
CONTINUOUSLY FOR LONG
TIME
12
SPECIFICATIONS
TECHNICAL SPECIFICATIONS
DEFROST
POWER
OPERATING
POWER SUPPLY
NOMINAL
CURRENT
NOMINAL
MODEL(S)
FREQUENCY
CONSUMPTION
CONSUMPTION
GR-382R
115V 60Hz
1,8A 140W 196W
CAPACITY: 331.13 Liters (11.8 cuft)
13
LG ELECTRONICS CANADA INC.
LG REFRIGERATOR
LG Electronics will repair or at its option replace, without charge, your product which proves to be defective in
material or workmanship under normal use, during the warranty period listed below from the date of original
purchase. This warranty is good only to the original purchaser of the product during the warranty period
as long as it is in any Canadian Province.
WARRANTY PERIOD
MODEL #
GR-382R
LABOR
2 Year
PARTS
2 Year
HOW SERVICE IS HANDLED
Call 1-888-542-2623 (1-888-LG-CANADA) and
choose the appropriate prompt. Please have produ
SEALED SYSTEM type (refrigerator) and ZIP Code ready.
5 Years
(Compressor, condenser,
and evaporator)
Serial Number
See our website at http://www.lg.ca
This warranty provides in-home service.
No other express warranty is applicable to this product. THE DURATION OF ANY IMPLIED
WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS
LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. LG ELECTRONICS
USA, INC. SHALL NOT BE LIABLE FOR THE LOSS OF THE USE OF THE PRODUCT,
INCONVENIENCE, LOSS OR ANY OTHER DAMAGES, DIRECT OR CONSEQUENTIAL,
ARISING OUT OF THE USE OF, OR INABILITY TO USE, THIS PRODUCT OR FOR ANY
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING THE IMPLIED
WARRANTY OF MERCHANTABILITY APPLICABLE TO THIS PRODUCT.
Some provinces do not allow the exclusion or limitation of incidental or consequential damages or limitations on
how long an implied warranty lasts; so these limitations or exclusions may not apply to you. This warranty gives
you specific legal rights and you may also have other rights which vary from province to province.
THE ABOVE WARRANTY DOES NOT APPLY TO:
1. Service trips to your home to deliver and pickup, install, instruct, or replace house fuses or correct wiring,
plumbing, or correction of unauthorized repairs.
2. Damage to the product caused by accident, vermin, fire, flood, alteration, misuse, abuse, improper
installation, or acts of God.
3. Commercial use or use for other than the intended purpose.
Therefore, these costs are the responsibility of the consumer.
CUSTOMER ASSISTANCE NUMBERS:
Retain your Sales Receipt to prove date of purchase.
A copy of your Sales Receipt must be submitted at the time
warranty service is provided.
To Prove Warranty Coverage:
→
To Obtain Product, Customer, or
Call 1-888-542-2623 (1-888-LG-CANADA) and choose the
appropriate prompt.
Service Assistance
by phone:
→
→
or by Internet:
To Obtain Nearest Authorized
Service Center, Parts Distributor,
Call 1-888-542-2623 (1-888-LG-CANADA) and choose the
appropriate prompt. Please have your product type
(refrigerator) and ZIP Code ready.
or Sales Dealer
by phone:
→
or by Internet:
→
|